AR67.10-P-1000-08TS Apply Adhesive Material

AR67.10-P-1000-08TS Apply Adhesive Material
- with CODE (Z04) Light armoring







Install windshield (1) on body flange (1) within 10 minutes after applying adhesive material (2, 3), otherwise adhesive force of adhesive material (2, 3) starts to decrease.

1. Guide application nozzle along adhesive surface on windshield (1) and uniformly apply adhesive material (2) in form of bead with height of approx. 16 mm.
2. Uniformly apply support bead (3) to white adhesive tape (4) on windshield (1) in form of bead with a height of approx. 16 mm.
Completely press out adhesive material not required, immediately following application.