GF27.60-P-3011NT Manual Drive Mode Selection, Function

GF27.60-P-3011NT Manual drive mode selection, function
- TRANSMISSION 722.9
- except CODE (428) Steering wheel shift buttons






With the selector lever and the transmission mode switch (S16/5) on the floor shift it is possible to adapt the automatic gearshift sequence to suit specific operating conditions.

Although the shift range can be changed in the forward gears whilst driving, the fully integrated transmission control (VGS) prevents an unacceptably high engine speed caused by a shift operation.

In position "C" (Comfort program) of the transmission mode switch (S16/5) a longer overall ratio is available compared with that in position "S" (Sports program) and thus a lower output torque for forward and rearward motion. This allows the vehicle to move off more gently. In addition, the gears are not driven to maximum revs.