Tire Pressure Module: Service and Repair

AR40.15-P-0100T Remove/Install Tire Pressure Monitoring System Control unit
- with CODE (475) Tire pressure monitor (Beru)
- with CODE (475) Tire pressure monitor (Siemens)







1 Read out variant coding of TPM [RDK] control module (N88)

NOTE:
- To do this connect STAR DIAGNOSIS and transfer data of TPM [RDK] control module (N88) to STAR DIAGNOSIS.
- Installation: Transfer stored data to new TPM [RDK] control module (N88).

2 Remove left side paneling in trunk
3 Unscrew bolt (1), lift mounting bracket (2) slightly and swivel to the side
4 Unscrew screws (3) and remove TPM [RDK] control module (N88) from mounting bracket (2)
5 Unlock electrical connector (4) and detach from TPM [RDK] control module (N88)
6 Install in the reverse order
7 Read out fault memory and erase if necessary.
8 Activate the tire pressure monitoring system.