AR01.30-P-5800-01TI Tightening Diagram For Cylinder Head Bolts

AR01.30-P-5800-01TI Tightening diagram for cylinder head bolts

Cylinder head:

Tightening pattern with bolt assignment, shown on the left and right cylinder head:

10 Bolt M12
11 Bolt M8

The order of tightening for the left and the right cylinder head given below must be followed in order to avoid any consequent damages.
1 Tighten bolts (10) according to stage 1.
2 Tighten bolts (11).
3 Tighten bolts (10) according to stage 2.
4 Retighten bolts (11).
5 Tighten bolts (10) according to stage 3.
6 Retighten bolts (11).
7 Tighten bolts (10) according to stage 4.
8 Retighten bolts (11).
9 Tighten bolts (10) according to stage 5.
10 Retighten bolts (11).

Use the reverse sequence to loosen the bolts (10 to 11).