Voice Activation Module: Service and Repair

AR82.70-P-0003T Remove/Install Voice Control System Control Unit
- with CODE (813) Voice control system (VCS [SBS])







1 Disconnect ground cable of battery
2 Remove damping material (1)
3 Remove carrier plate covering (2)
4 Separate electrical plug connection (3)
5 Unclip wiring harness (4) from carrier plate (5) and place to one side until screw (6) is accessible
6 Unscrew screw (6)
7 Open tie straps (7) and remove voice control system control module (A35/11) from carrier plate (5)

NOTE: Installation: Replace tie straps (7)

8 Install in the reverse order