Computers/Controls - DAS/XD Add-On 2009-12-07-1327

DAS/XD ADD-ON 2009-12-07-1327 FOR PASSENGER CARS

Topic number LI58.40-P-048777

Version 1

Design group 58.40 Workshop equipment/MB testers

Date 01-07-2010

Validity DVD version 11/2009

Reason for change

Reason for block

Complaint:

IC

Model series: 164, 251

Fault message in symptom "After replacement and (or) programming of the control unit, unjustified warning messages for the stationary heater appear on the display."

CDID2

Model series: 204, 212

DAS initialization cannot be performed

ME97 / MED97 / ME97AMG

Model series: 204, 207, 212

The engine control unit refuses to activate drive authorization.

SIM4CNG

Model series: 211

Coding of engine control unit not possible.

TSGVL9, TSGVR9, TSGHL9, TSGHR9, TSGML9, TSGMR9

Model series: 221

Coding in diagnosis per factory specifications is not possible

AUDIO/COMAND

Model series: 207, 212

Audio50 or COMAND: Control unit programming cannot be started if other MOST components (e.g. media interface, DAB) are installed.

SRS/airbag

Model series: X204

If the SM for the X204 cannot be successfully completed in the first run (e.g. communication problem, OBD connector disconnected etc.), it is not possible to repeat the initial startup procedure (fault message -99 after CU programming).

Cause:

For all complaints: XD and DAS diagnostic data.

Remedy:

DAS/XD add-on 2009-12-07-1327 for passenger cars:

This add-on can be installed over DAS/XD version 11/2009.

This add-on does not supersede any other add-ons and must be additionally installed.





Symptoms








Control unit/fault code





Validity