Engine Oil Level Indicator

Engine oil level indicator

Note: The vehicle must be horizontal for at least 5 minutes with the engine switched off at operating temperature. Otherwise measurement accuracy can be compromised.







1. Switch on ignition

2. Press the system selection button (S110s3) repeatedly until (A1p13) the basic display (kilometer reading or temperature display) or speed display is shown.

3. Press the scroll back and forward button (S110s1) repeatedly until message "engine oil level measurement in progress" appears in the multifuntion display (A1p13).

5. The measurement result is shown in the multifuntion display (A1p13).

6. Correct the engine oil level if necessary and check engine oil level again.

7. Switch off ignition.