Headlamp Switch: Service and Repair

AR54.25-P-3250T Remove/Install Exterior Lamp Switch







1 Disconnect ground cable of battery
2 Remove left trim strip on the instrument panel
3 Unscrew screws (1)
4 Using a mounting wedge (2), unclip exterior lamp switch (S1) from the instrument panel in the direction of the arrow and pull out of the instrument panel until the electrical connector (3) is accessible

See "Special Tools" given below.

5 Disconnect electrical connector (3) and remove exterior lamp switch (S1)
6 Install in the reverse order
7 Carry out function check of lighting system

Special Tools

Assembly Wedge, P/N # 110 589 03 59 00: