GF98.00-P-4040T Filler Overview

GF98.00-P-4040T Filler Overview

Component Identification:

Function coating

Material:
Water base, highly resistant to stone impact

Processing method:
ESTA

Coating thickness:
15 to 22 microm

Intermediate evaporation:
70 °C object temperature, 5 min

Baking conditions:
130 °C, 17 min

Function:
The function coating fulfills the same purpose as the filler, however, offers better environmental compatibility with simultaneously reduced coating thickness and therefore less material consumption:
^ It offers the best prerequisites for good spreading and optical characteristics for the top coat.
^ The high resilience provides good resistance to stone impact in the entire paint structure in spite of low coating thickness even at low temperatures
^ Compensation of small irregularities
^ Corrosion protecting pigments increase the corrosion protection properties, particularly on sheet metal edges.