AR68.20-P-2050T Remove/Install Front Floor Covering (Left)

AR68.20-P-2050T Remove/Install Front Floor Covering (Left)

Shown On Model 211.0:

1 Remove cover below instrument panel (left)
2 Remove A-pillar paneling in left footwell
3 Remove edge guard (2) in area of entrance paneling (3)
4 Remove entrance paneling (3)
5 Remove plugs (4) from accelerator pedal (5) with assembly wedge and unscrew nut below

See "Special Tools" given below.

6 Remove accelerator pedal (5) and disconnect electrical connector (6) from below instrument panel (arrow)
7 Pull out left front floor covering (1)
8 Remove left front floor covering (1)
9 Install in the reverse order

Special Tools

AR68.20-P-2050T Remove/Install Front Floor Covering (Left)

Shown On Model 211.0:

Assembly Wedge, P/N # 110 589 03 59 00: