FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Campaign - Navigation System Disc Update: Overview

FILE:
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER

Campaign No. 2006110005, August 2008

Revision History

Revision Date Purpose

C 8/17/08 Navi DVD part numbers updated, note added and revised in parts information

B 12/01/06 Updates to work instructions

A 11/22/06 Update to Navigation DVD version checking procedure

- 11/17/06 Initial issue

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT:
MODELS 164, 171, 203, 209, 211, 215, 219, 220, 221, 230, 251, X164
MODEL YEAR 2005-2007

INSTALL SOFTWARE FOR NAVIGATION SYSTEM








This Service Campaign has been initiated because DCAG has determined that certain affected vehicles (see VIN range shown above) may have an earlier version navigation disc installed than that specified. This could in some cases lead to navigation directions based upon non updated map data. Dealers will update the navigation disc in the affected vehicles as required.

Please review the Effective Serial Number chart shown above, and if necessary, repair the subject vehicles during the vehicle's next service.

Prior to performing this Service Campaign:

^ Please check VMI to insure the vehicle is involved and to determine if the vehicle has been previously repaired.

^ Please review the entire Service Campaign bulletin.

Approximately 12,559 vehicles are affected.





Parts Information

NOTE:
^ Due to the multiple Navigation DVD released annually, there may be a newer Navi DVD version than the one referenced in this Campaign Bulletin. Please use the latest Navigation DVD available from Navteq. MUBSA will update this bulletin to reflect latest Navi DVD part numbers as they become available.

^ Repairs performed using any other part(s) than the ones in this Bulletin will not have been performed in accordance with the campaign. Accordingly, warranty claims submitted with reference to an improper part number(s) will be denied.

^ The following allowable labor operation should be used when submitting a warranty claim for this repair:








Warranty Information