P1875

CAN communication with other control units installed in this vehicle is not possible.


Possible cause:

- Engine compartment CAN databus
Affected functions:

- CAN Communication

-------------------------------------------------

Test 1: Remedial action if no CAN communication is possible with other control units installed in this vehicle

1. Remedial action if no CAN communication is possible with other control units installed in this vehicle
Operation number of operation texts and work units or standard texts and flat rates:27-0641Start test sequence.1. Erase fault memory.2. Perform a road test and switch the ignition off and on several times with the vehicle stationary.Continue check procedure.1. Once again read fault memory.NOTE

- The fault memory is erased by pressing button "F2".
Continue with button "F2"

Warning!Communication with ECU required.