E0602

Control module Y3/8n4 (Fully integrated transmission control (VGS) control unit) is not coded.


Possible cause:

- Coding error.
Affected functions:

- Automatic transmission Function

-------------------------------------------------

Test 1: Remedial action for non-coded control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)

1. Remedial action for non-coded control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Operation number of operation texts and work units or standard texts and flat rates:27-0641POSSIBLE CAUSES

- SCN coding for control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit) was not performed.
- The coding data were not or were not completely transferred to the memory of control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit).
REMEDY

- Repeat SCN variant coding.
NOTEIf repeated attempts at SCN coding were not successful, please notify the Hotline. Continue with button "F2"

Warning!Communication with ECU required.