Manufacturer Code Charts: 2711

Hydraulic fault in transmission (engaging shift element does not engage).


Possible cause:

- Mechanical or hydraulic defect in the transmission
Affected functions:

- Automatic transmission Function

-------------------------------------------------

Test 1: Remedial action if hydraulic clutch in automatic transmission fails to cut in

1. Remedial action if hydraulic clutch in automatic transmission fails to cut in
Operation number of operation texts and work units or standard texts and flat rates:27-0641Remedy

- Check and, if necessary, correct oil level of automatic transmission.
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 27401 B1 END OF TEST