Manufacturer Code Charts: 2691

[8] Check component B60/2 (Right exhaust back pressure sensor).: Plausibility

Test 1: Check component B60/2 (Right exhaust back pressure sensor).

1. Check component B60/2 (Right exhaust back pressure sensor).
Important note: The sensor is ventilated by means of a bore underneath the plug.If the plug is disconnected and then plugged back in, an incorrect pressure value is briefly displayed.To ensure that the positive pressure is safely released, wait for approx. 3 min.

Check component B60/2 (Right exhaust back pressure sensor).
Test prerequisite

- The engine is cold.(Coolant temperature < 60° C)
- After engine has run it must be switched off for at least 30 min.
- Ignition ON
Status of the relevant actual values:
- Coolant temperature:Warning! Communication with ECU required.
Communication with ECU required