[2] Check component M55 (Inlet port shutoff motor).: Positioner signals fault Y.

[2] Check component M55 (Inlet port shutoff motor).: Positioner signals fault Y.

Test 1: Check component M55 (Inlet port shutoff motor).

1. Check component M55 (Inlet port shutoff motor).
Check component M55 (Inlet port shutoff motor).
Figure legend

- M55 (Inlet port shutoff motor)
Procedure

- Check component M55 (Inlet port shutoff motor) for unobstructed movement by actuation.
Proceed to 'Actuation' with F2







NOTE The test contains menu items 'Test in installed state' and 'Test with linkage unhooked'.Test may 'Test with linkage unhooked' only be performed if instructed to do so by test 'Test in installed state'.Communication with ECU required and select next test step.