[2] Control Throttle valve position: Control deviation is too large.
[2] Control Throttle valve position: Control deviation is too large.
Test 1: Check component M16/6 (Throttle valve actuator).
1. Check component M16/6 (Throttle valve actuator).
Check component M16/6 (Throttle valve actuator) by means of actuation.
Figure legend
- M16/6 (Throttle valve actuator)
- B5/1 (Charge pressure sensor)
- The muffler was removed from the picture to improve the view.
Test prerequisite
- Check connector on component M16/6 (Throttle valve actuator) for correct seating, contact and latching.
- Operate engine at idling speed.
Important information for following actuation
- The throttle valve of component M16/6 (Throttle valve actuator) is automatically opened and closed at the following actuation.
- The pressure difference at component B5/1 (Charge pressure sensor) indicates whether the throttle valve of component M16/6 (Throttle valve actuator) is functioning.
Communication with ECU required