[8] Quantity Fuel injection: Limited number of injections due to the internal temperature of the control unit

[8] Quantity Fuel injection: Limited number of injections due to the internal temperature of the control unit

Test 1: Internal fault N3/9 (CDI control unit)

1. Internal fault N3/9 (CDI control unit)
Possible cause and remedy

- Test air admission of component N3/9 (CDI control unit).
- Erase fault memory in control unit N3/9 (CDI control unit)
- If fault occurs once again, replace control unit N3/9 (CDI control unit).
End of test