[2] Calibration Internal resistance G3/2 (O2 sensor upstream of KAT): Calibration Open circuit in wiring / Short circuit to gro

[2] Calibration Internal resistance G3/2 (O2 sensor upstream of KAT): Calibration Open circuit in wiring / Short circuit to ground

Test 1: Check component G3/2 (O2 sensor upstream of KAT).

1. Check component G3/2 (O2 sensor upstream of KAT).
Important note

- After replacement of component G3/2 (O2 sensor upstream of KAT), the lambda values must be reset via menu 'Control unit adaptations'.
Communication with ECU required