[4] Check system 'Immobilizer'.: Expended authentication value

[4] Check system 'Immobilizer'.: Expended authentication value

Test 1: Check system 'Immobilizer'.Expended authentication value

1. Check system 'Immobilizer'.Expended authentication value
Possible cause and remedy

- The key number is not correctly recognized.
- Inspect key or key track.
- Erase fault memory in control unit N73 (EIS [EZS] control unit)
- If fault occurs once again, replace control unit N73 (EIS [EZS] control unit).
End of test