GF82.85-P-3004PMJ Data Exchange Between the Operating Unit and Instrument Cluster, Function

GF82.85-P-3004PMJ Data Exchange Between The Operating Unit And Instrument Cluster, Function

MODEL 203.0 /2 /7 as of 24.4.04
- with CODE (498) Japan version
- except CODE (529) HIGH Class Japan
- up to Model Year 8

Operating the radio (A2) at the multifunction steering wheel (MFL)
The left multifunction steering wheel button group (S110) and the right multifunction steering wheel button group (S111) as well as the multifunction display (A1p13) of the instrument cluster (A1) can be used to operate various systems controlled over the Media Oriented System Transport (MOST) and display information on these systems. These include:
- Audio systems (radio (A2), CD disk drive)
- Telephone

The entire exchange of data between the instrument cluster (A1) and radio (A2) occurs over the Controller Area Network Bus Class B (interior) (CAN-B).

All signals from the left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111) at the multifunction steering wheel (MFL) are read in by the steering column module (N80) over the local interconnect network (LIN) and sent to the CAN-B.

The instrument cluster (A1) detects the coded messages and causes the system currently being activated or operated (audio or telephone) to be shown on the multifunction display (A1p13).

Control and display options on the multifunction display (A1p13)
Readout:
- Set frequency band and possible memory location number
- Name (only for the "Traffic Message" function) and frequency of the station
- Information whether station search was accomplished with frequency or via stored station list

Operation:
- Volume
- Station search via station list or frequency, next station/previous station

CD player with changer (in glove compartment) (A2/6) with code (819) 6-disc CD changer
Readout:
- Number of CD currently playing
- Number of CD track currently being played

Operation:
- Volume
- Selection of title
- Next/Previous title

Telephone with code (388) "portable CTEL" telephone UPCI system
Readout:
- Entry request for PIN (personal identification number)
- Name of provider
- Vehicle outside transmit or receive range of telephone network
- Call number (if stored) or name of caller (if transmitted at the same time with two-way radio)

Operation:
- Volume
- Selection of name from stored phone directory, display of phone number and memory location number of party being called.
- Start making a call
- Accepting a call
- Dial repeat
- Reject or end call