GF82.20-P-2007SK Switch Interior Lighting on By Means of Anti-Theft Alarm, Function

GF82.20-P-2007SK Switch Interior Lighting On By Means Of Anti-Theft Alarm, Function
- with CODE (551) Anti-theft alarm system (ATA [EDW])
- with CODE (552) Anti-theft alarm (ATA [EDW]) for Switzerland



Function requirements:
^ Alarm triggered

The overhead control panel control unit (N70) receives the message "Switch on interior lamp" either from the rear SAM control unit with fuse and relay module (N10/2) whenever an alarm is triggered by the anti-theft alarm system (ATA) or by the EIS control unit (N73) in the event of a panic alarm (United States of America only).

The following lamps are switched on immediately in an undimmed state:
^ Left interior lamp (N70e4)
^ Right interior lamp (N70e5)
^ Left reading lamp (N70e2); except code (876) interior lighting package
^ Right reading lamp (N70e3); except code (876) interior lighting package
^ Left reading lamp (A67e1); with code (876) interior lighting package
^ Right reading lamp (A67e2); with code (876) interior lighting package
^ Right front footwell lamp (E17/15); with code (876) interior lighting package
^ Left front footwell lamp (E17/16); with code (876) interior lighting package