Procedures

AZ54.65-P-0001-01A Paint Sensors And Contour Rings
- MODEL 140, 163, 168, 170, 202, 208, 210 up to 30.6.99, 220
- except CODE (550) Trailer hitch
- except CODE (809) Model year 1999 MODEL 171
- except CODE (220a) Parktronic System (PTS)






On a bumper which is not painted, plastic gray or black, only paint the end face of the sensors.

1 For painting leave the sensors in their packaging and only paint the end face.
Clean and degrease the end faces before painting.






2 Clip contour ring (1) onto the installation housing (2).
Model 210.0/6 and model 208, paint the four contour rings with the part no. 0 263 009 067. Model 210.2, paint contour rings with part no 0 263 009 067 and two with part no.0 263 009 044. The part no. is embossed on the contour rings.

3 Tape the installation housing and only prime and paint contour ring.