Climate Control Exhaust Gas Sensor: Service and Repair

AR83.40-P-6730R Remove/Install Multifunction Sensor







1.1 Switch ignition off and remove key from electronic ignition switch EIS
1.2 Switch motor off and remove Keyless Go card from vehicle

NOTE: With CODE (889) Keyless Go Keep Keyless Go card out of transmitting range.

2 Unclip and remove cover (1)
3 Disconnect electrical connector (2) from AAC multifunction sensor (B31/1)
4 Remove AAC multifunction sensor (B31/1)

NOTE: Installation: White sensor surfaces must point in direction of air intake.

5 Install in the reverse order.