Evaporator Temperature Sensor / Switch: Service and Repair

AR83.30-P-8085R Remove/Install Evaporator Temperature Sensor







1.1 Switch off ignition and withdraw key from electronic ignition switch (EIS)
1.2 Switch off engine, remove Keyless Go card from vehicle

NOTE: For CODE (889) Keyless Go Keep Keyless Go card out of transmission range.

2 Remove cover below left of instrument panel
3 Detach electrical connector at evaporator temperature sensor (B10/6)
4 Remove evaporator temperature sensor (B10/6)
5 Install in the reverse order.