Campaign - Headlamp Range Adjustment Nonfunctional

Date: May 21, 2008

Order No.: P-B-82.10/612a

Supersedes: P-B-82.10/612 dated Feb. 12, 2008

Group: 82

Revision History

Revision Date Purpose

a 5/21/08 Applicable Fault Codes Revised

- 2/12/08 Initial issue

SUBJECT:
Model 211.026/056/065/070/072/076/077/082/083/087/090/256/265/
276/277/282/283/287

Equipped with Option Code 615 (Bi-Xenon)

Headlamp Range Adjustment Nonfunctional with DTC Codes 9010, 9011, 9012, 9013 or 9024 (up to VIN B111276) Parking Light LED Nonfunctional (up to VIN B100720)

If you receive customer reports in the above model vehicles equipped with bi-xenon headlamps of either of the below conditions, please replace the bi-xenon headlamp to resolve.

1. Headlamp range adjustment nonfunctional and DTC Codes 9010, 9011, 9012, 9013 or 9024 (up to VIN B111276). This may be caused by the headlamp range adjustment motor may be sticking in the rear reference position due to excessive force in the axial direction.

2. Parking light LED nonfunctional (up to VIN B100720). This may be caused by the solder bridge or broken internal connection to the headlamp unit.

Note:
Refer to EPC Group 82 for applicable part number.

Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on February 12, 2008. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.





In Case of Warranty, use the table.