Interior - Manual Lumbar Support Inoperative

Date: June 16, 2008

Order No.: P-B-91.10/166

Supersedes:

Group: 91

SUBJECT:
Model 211.026/065/070/076/082/265/276/282/283
Equipped with Manual Lumbar Support (Codes 404/406 up to end of MY 2004, Except Code 804 and 054)

Manual Lumbar Support Not Functioning

If you receive customer reports in the above model vehicles of the manual lumbar support not functioning, this is due to the lumbar gear ratio being too high. To resolve, the lumbar gear assembly should be replaced per WIS document AR91.10-P-6611T. It is no longer necessary to replace the entire backrest frame.





Parts Information

Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on June 16, 2008. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.





In Case of Warranty, use the table.