E0602

Control module N15/3 (ETC [EGS] control unit) is not coded.


Possible cause:

- N15/3 (ETC [EGS] control unit)
Affected functions:

- Automatic transmission Function

-------------------------------------------------

Test 1: Remedial action for non-coded control unit N15/3 (ETC [EGS] control unit)

1. Remedial action for non-coded control unit N15/3 (ETC [EGS] control unit)
Operation number of operation texts and work units or standard texts and flat rates:27-0641Possible cause and remedy

- Carry out coding once again.
End of test