[2] Test signal cable to component Y100/1 (Right charge pressure positioner).: Short circuit to ground

[2] Test signal cable to component Y100/1 (Right charge pressure positioner).: Short circuit to ground

Test 1: Check component Y100/1 (Right charge pressure positioner).

1. Check component Y100/1 (Right charge pressure positioner).
Possible cause and remedy in the case of current fault code

- Test signal cable to component Y100/1 (Right charge pressure positioner).(Short circuit to ground)
Possible cause and remedy in the case of stored fault code

- Inspect wiring and connectors at connection points for loose contacts, damage and corrosion. Repair or replace as required.
End of test