[1] Check component Y100/1 (Right charge pressure positioner).: Positioner signals fault.

[1] Check component Y100/1 (Right charge pressure positioner).: Positioner signals fault.

Test 1: Y100/1 (Right charge pressure positioner)

1. Y100/1 (Right charge pressure positioner)
Possible cause and remedy

- In the case of warranty or goodwill operations, see TIPS document in design group 09.40
Procedure

- Check component Y100/1 (Right charge pressure positioner) for unobstructed movement by actuation.
Proceed to 'Actuation' with F2

Actuation of component Y100/1 (Right charge pressure positioner)
Test prerequisite

- Engine at idle
- All electrical accessories must be switched off.
Test sequence

- The entire linkage from component Y100/1 (Right charge pressure positioner) to the turbocharger must move visibly during the actuation.
Important note

- Never actuate turbocharger adjusting mechanism by hand.
Proceed to 'Actuation' with F2

Warning!Communication with ECU required.