[4] Check component G2 (generator).: Electrical fault

[4] Check component G2 (generator).: Electrical fault

Test 1: Alternator diagnosis

1. Alternator diagnosis
Precondition for generator test

- The poly V-belt must be correctly tensioned.
- The charge level of the battery must be OK.
- Work instructions number AR 54.10-P-1129TX is available in WIS.
Functions

- Read work instructions via button F3.
- Move on to actuation with button F4
Test prerequisites

- Run engine.
- Switch off all consumers.
- No battery charger may be connected.
- Coolant temperature between 60° C and 90° C


YES

Test 1.1: Determining the battery condition

1.1. Determining the battery condition
Note

- WIS is not available on this system.
- It is not possible to display the requested WIS document [ ar5410p1129tx ].
- You can start WIS on another system and display the WIS document by entering the document number [ ar5410p1129tx ] in the 'Contents' field.


1.1. No further information available.


NO
Warning!Communication with ECU required.