[8] Check component G2 (generator). Bidirectional bus driver interface: Thermal overload of control module N3/9 (CDI control un

[8] Check component G2 (generator). Bidirectional bus driver interface: Thermal overload of control module N3/9 (CDI control unit)

Test 1: Alternator diagnosis

1. Alternator diagnosis
Possible cause and remedy

- Thermal overload of control module N3/9 (CDI control unit)
- Test air admission of component N3/9 (CDI control unit).
- Replace component N3/9 (CDI control unit).
End of test