[8] Check component B60 (Exhaust back pressure sensor).: Plausibility

[8] Check component B60 (Exhaust back pressure sensor).: Plausibility

Test 1: Check component B60 (Exhaust back pressure sensor).

1. Check component B60 (Exhaust back pressure sensor).
Possible cause and remedy

- In the case of warranty or goodwill operations, see TIPS document in design group 09.20
Continue with button F2

Important note: The sensor is ventilated by means of a bore underneath the plug.If the plug is disconnected and then plugged back in, an incorrect pressure value is briefly displayed.To ensure that the positive pressure is safely released, wait for approx. 3 min.

Check component B60 (Exhaust back pressure sensor).
Test prerequisite

- The engine is cold.(Coolant temperature < 60°C)
- After engine has run it must be switched off for at least 30 min.
- Ignition ON
Status of the relevant actual values:
- Coolant temperature:Warning! Communication with ECU required.
Continue with button F2