AR28.10-P-1000-17P Detaching and Disassembling Transmission Cover

Detaching and disassembling transmission cover





1. Use a suitable screwdriver to press the radial sealing ring (15b) out of the transmission cover (15).
2. Unscrew bolts (14) from transmission cover (15).
3. Remove transmission cover (15) from rear section of transmission housing (16b).





4. Detach circlip (15c).
5. Remove O-ring (13a).
6. Pull output shaft of rear axle drive (13) out of the transmission cover.





7. Remove ball bearing (15d) from the transmission cover (15).