SM82.95-P-0001-01P Lay Wiring Harness For Remote Door Opening Feature

SM82.95-P-0001-01P Lay Wiring Harness For Remote Door Opening Feature
MODEL 203.0
- with CODE (494a) USA version






1 Pull coupling (see arrow) from the E-call control module (A35/8).











2 Connect adapter line (1) with coupling to the open connection on the E-call control module (A35/8).
3 Connect free plug of adapter line (1) to the pulled coupling from the E-call control module (A35/8) and wrap with felt tape (left photo).
4 Arrange wiring as shown in right photo and secure.







5 Guide single blue wire from the adapter wiring harness (1) along existing wires to the rear SAM control module with fuse and relay module (N10/2) and secure with tie straps.











6 Pull coupling (21) from plug position 21 on the back of the rear SAM control module with fuse and relay module (N10/2).
7 Pull multipoint connector (21b) from the coupling housing (21a) and insert blue wire (bl) into plug position 20 (see arrow).