Automatic Air Conditioning (AAC) Component Networking

GF83.40-P-0001-02P Automatic Air Conditioning (AAC) Component Networking
MODEL 203.0 /2 /7 up to 31.5.01
- with CODE (580) Air conditioning (or Tempmatic for USA)
MODEL 203.0 /2 /7 as of 1.6.01
- with CODE (580) Automatic air conditioning up to Model Year 8






Temperature control
A1 Instrument cluster
B10/6 Evaporator temperature sensor
B14 Outside temperature display temperature sensor
B31/2 Air humidity sensor (up to 28.6.06)
M2/5 Fresh air/air recirculation flaps actuator motor
M2/6 Left blend air flap actuator
M2/7 Right blend air flap actuator
N10/1 Front SAM control unit with fuse and relay module
N22 AAC [KLA] control and operating unit
N22b1 In-car temperature sensor
N70 Overhead control panel control unit
N70b1 In-car temperature sensor (up to 31.5.02 and as from 1.6.05)
CAN Controller Area Network bus class B (interior compartment) (CAN B)
KB A/C bus







Refrigerant compressor control
A1 Instrument cluster
A9 Refrigerant compressor
B10/6 Evaporator temperature sensor
B12/2 Refrigerant pressure and temperature sensor
B14 Outside temperature display temperature sensor
N10/1 Front SAM control unit with fuse and relay module
N22 AAC [KLA] control and operating unit
CAN Controller Area Network bus class B (interior compartment) (CAN B)







Actuation of engine and air conditioning electric suction fan with integrated control (M4/7)

A1 Instrument cluster
B11/4 Coolant temperature sensor
B12/2 Refrigerant pressure and temperature sensor
B14 Outside temperature display temperature sensor
M4/7 Engine and AC electric suction fan with integrated control
N3/9 CDI control unit (with diesel engine)
N3/10 ME-SFI [ME] control unit (with gasoline engine)
N10/1 Front SAM control unit with fuse and relay module
N22 AAC [KLA] control and operating unit
N73 EIS [EZS] control unit
CAN Controller area network bus class B (interior compartment) (CAN B)







Comfort closing and opening
1 Save and close tilting/sliding roof (SHD) position request
2 Save and close window position request
3 Open tilting/sliding roof up to the stored position request
4 Open window up to saved position request
5 Close/open tilting/sliding roof
6 Close/open window
7 Tilting/sliding roof position
8 Window position
9 Door status
M10/3 Left front power window motor
M10/4 Right front power window motor
M10/5 Left rear power window motor (for models 203.0/2)
M10/6 Right rear power window motor (for models 203.0/2)
M12m1 Roof motor (for models 203.0/2 with code (414) Power glass tilting/sliding roof or for model 203.7 with code (413) Panoramic sliding roof)
N10/2 Rear SAM control unit with fuse and relay module
N22 AAC [KLA] control and operating unit
N22s2 Air recirculation switch
N69/1 Door control unit front left
N69/2 Door control unit front right
N69/3 Left rear door control unit (for models 203.0/2)
N69/4 Right rear door control unit (for models 203.0/2)
N70 Overhead control panel control unit
S17/3 Left front door contact switch
S17/4 Right front door contact switch
S17/5 Left rear door contact switch (on model 203.0/2)
S17/6 Right rear door contact switch (on model 203.0/2)
CAN Controller Area Network bus class B (interior compartment) (CAN B)