GF82.85-P-2011RM TV-Mode, Function

GF82.85-P-2011RM TV-mode, Function
- with CODE (527) COMAND APS (with navigation)
- with CODE (860) TV tuner


The liquid crystal display (LCD) color display of the COMAND operating, display and control unit (A40/3) is used for television reception. TV reception is possible up to approx. 6 km/h and can be activated with the present "TV" button. The video signals are transmitted by the TV tuner (MOST) (A2/10) to the COMAND operating, display and control unit (A40/3) via the Media Oriented System Transport (MOST). The audio signals are also transmitted to the audio gateway control unit (N93/1) via the MOST and then output via the vehicle speakers. The desired tone adjustments (volume, bass, treble, and fader) are carried out in the audio gateway control unit (N93/1). With code (810) Sound system the audio signals are amplified by the sound amplifier (A2/13) where they are output via the vehicle speakers.

Search and store station
During TV mode, the stations can be found and stored by using the following functions:
^ Automatic station search
^ Station search via station list
^ Adjust stations via channel selection
^ Station selection via direct channel input
^ Station selection from the station memory

It is possible to store up to 2 x 12 stations.

AV mode
2 external units can be connected to the TV system. The right knob can be used to select "AUX 1" or "AUX 2" via the menu field.

TV mute, function
The mute function of the audio sources is maintained when it was activated before switching off.

Displaying mute status in the TV screen
If mute is set (muting) a mute symbol is displayed on the right in the display of the COMAND operating, display and control unit (A40/3). It is necessary for the mute status to be transmitted to the TV tuner (MOST) (A2/10) with a newly generated command so that the mute status can be displayed on the TV screen.

The setting which was performed last before switching off the ignition, is adopted when the ignition is switched on again.