AR33.20-P-0315-03I Pulling Double-Row Angular Ball Bearing Out and In

AR33.20-P-0315-03I Pulling double-row angular ball bearing out and in

Special Tools:

Extraction

Component Identification:

1 Pull double-row angular ball bearing (9n) out of steering knuckle (5) using extraction and insertion tool and remove.

On model 169, 203, 245 use extraction and insertion tool 124 589 05 43 00.

On model 211, 220 use extraction and insertion tool 140 589 08 43 00.

Inserting

Component Identification:

The double-row angular ball bearing (9n) must point with the seal (arrow) inwards.

Component Identification:

2 Pull double-row angular ball bearing (9n) into the steering knuckle (5) up to the contact surface (arrow) using extraction and insertion tool.