AH01.45-P-0001-01R Notes on Application of Sealant to Oil Pan

Notes on application of sealant to oil pan





The line drawn F marks the application of sealant.
Clean sealing surface. The sealant must be applied only to the specified surface as a bead with a height and width of 2.0 mm - 0.5 mm. The sealing compound must be applied within 10 min. The silicone bead must not be spread. Only the silicone sealant listed may be used.

Application of sealant to top part of oil pan





The line drawn F marks the application of sealant.
Clean sealing surface. The sealant must be applied only to the specified surface as a bead with a height and width of 2.0 mm ~ 0.5 mm. The sealing compound must be applied within 10 min. The silicone bead must not be spread. Only the silicone sealant listed may be used.

Application of sealant to bottom part of oil pan