AR33.20-P-0500-01VM Pressing Out and Attaching Follower Joint at Steering Knuckle

AR33.20-P-0500-01VM Pressing out and attaching follower joint at steering knuckle

Modification Notes:

Wheel Location, Hub:

Special Tools:

Component Identification:

Pushing off

1 Unscrew self-locking nut (1) of supporting joint (8) to transverse control arm (6).
2 Mount thrust piece.
3 Use puller (09) to pry off supporting joint (8).
4 Remove puller (09) and thrust piece.

Install
5 Clean tapered connection.

The cone and thread must be free of grease and oil

6 Replace self-locking nut and tighten.