AR01.45-P-7555IW Remove/Install Bottom Part of Oil Pan

Remove/install bottom part of oil pan

Shown on Engine 113:

Remove/Install

DANGER:
- Risk of death. Death may result if vehicle slips or topples from the lifting platform.
- Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

1 Raise vehicle.
2 Detach lower engine compartment paneling.
3 Drain and collect engine oil.

NOTE: Installation: Replace sealing ring of oil drain plug.

4 Dismount right and left oil line (2, 3) of automatic transmission at oil pan bottom section (1).
5 Dismount high-pressure line (4) of rack-and-pinion steering at oil pan bottom section (1) and tie to the side.
6 Dismount oil pan bottom section (1)

NOTE: Installation: Clean sealing surfaces of oil pan and oil pan bottom section (1).

7 Install in the reverse order.

DANGER:
- Risk of accident. Accidents may result if the vehicle starts off unintentionally with the engine running. Risk of injury as working around the engine during start-up or while running may result in contusions and burns.
- Secure vehicle to prevent it from moving. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.

8 Check engine oil level.
9 Run engine and inspect for leaks.