Quarter Window Glass: Adjustments

AR67.30-P-4200Q Adjust Rear Side Windows

Remove

DANGER!
Risk of injury to fingers being jammed or squeezed when removing and installing or aligning hoods, doors, trunk lid/tailgate or sliding roof.
- When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

1 Loosen seat belt extender and lay down to side

NOTE: Do not disconnect connector

Adjusting
2 Preadjustment of rear side window
- Dimension "a" gap between door window and rear side window = 8 mm
- Bolt of rear side window to power window
- Screw for rear side window on window lift mechanism = 9 Nm
3 Adjust window transition of rear side window
- Dimension "a" transition of door window to rear side window = 1 mm
- See Special Tools below
4 Adjust tension of rear side window
- See Special Tools below
5 Fine adjustment of rear side window
- Dimension "a" gap between door window and rear side window = 8 mm
- Bolt of rear side window to power window
- Screw for rear side window on window lift mechanism = 9 Nm
- Bolt for rear side window stops = 9 Nm

Install
6 Install seat belt extender

Special Tools

Socket Wrench - 209 589 00 09 00: