Cell Phone - Installation Instructions: Overview

Installation Instructions

Date: May 2006

Order No.: P-I-82.70/378A

Supersedes: P-I-82.70/378

Group: 82

Update:
New - Section J, "Installing the Telephone Cradle (VINs as of F176908)"

SUBJECT:
MODEL 209.356/365/375/376

MODEL YEAR 2005-2006

CELLULAR TELEPHONE INSTALLATION

WARNING
Do not disconnect the negative battery cable. Extensive reprogramming requirements will otherwise be necessary. Wiring harnesses will therefore be electrically active.

Severe vehicle damage, personal injury, or death from electrical shock could result. Exercise extreme caution while executing these installation instructions. Keep the ignition and radio powered OFF through the final test.

Notes on MOST optical fibers

^ Optical fibers damage easily-handle optical fibers with care to prevent cuts, nicks, abrasions, and crushing.

^ Optical fiber "ring configurations" must form a closed loop to function (i.e. couple the input of a component with the output of the preceding component).

^ Identify MOST optical fibers by their orange, semi-rigid insulation.

^ Electromagnetic interference (EMI) from bundled vehicle electrical harnesses does not affect optical fibers.

NOTICE!
Incorrect installation of connectors can result in damaged, bent pins.
Damaged, bent pins will result in component malfunction or failure.
Inspect connectors before and after installation.