AR35.20-P-0112-01P Remove/Install Rubber Mount On Track Rod

AR35.20-P-0112-01P Remove/Install Rubber Mount on Track Rod
- MODEL 171
- MODEL 203
- MODEL 209 except CODE (P98) Black Series






203 589 01 43 00
Extraction and installation tool





Remove

1 Using extraction and insertion tool (04e, 04f) press rubber mount (4b) out of the tie rod.
4 Track rod
4b Rubber mount
04e Insertion tool, upper part (part 02)
04f Insertion tool, lower part (part 01)





Install

2 Using the extraction and insertion tool (04e, 04f) press the rubber mount (4b) into the tie rod until the collar of the extraction and insertion tool, upper part (04e) abuts the boss on the tie rod.