AH91.60-P-0611-02P Notes on Controlled Deployment of Airbag, Sidebag and Emergency Tensioning Retractor Units

AH91.60-P-0611-02P Notes on Controlled Deployment of Airbag, Sidebag and Emergency Tensioning Retractor Units
Models 163, 164, 168, 170, 199, 202, 203, 208, 209, 210, 215, 220, 230, 240, 251, 414, 461, 463

The unattached airbag, sidebag, windowbag and emergency tensioning retractor units should, if possible, be deployed in a scrapped vehicle (with doors closed).
Position the unattached airbag, sidebag, windowbag and emergency tensioning retractor units in the footwell with the discharge hole pointing upwards.
In exceptional cases - i.e. when there is no suitable vehicle around to use - the airbag, sidebag, windowbag and emergency tensioning retractor units can be placed in a transport container for replacement engines and deployed there (with the cover sealed).
The adapter line and the deployment device are to be ordered through the usual replacement part channels.
The 2-pin plug connection becomes damaged when deploying the unattached airbag, sidebag, windowbag and emergency tensioning retractor units.
Therefore, the adapter cable must be pulled out of the plug and replaced.