GF82.85-P-3016QMU Information Service, Function

GF82.85-P-3016QMU Information Service, Function
- with CODE (530) COMAND APS USA (with navigation system)


Sequence of a service inquiry
A change to service mode is made via the "SVC" button on the COMAND operating, display and control unit (A40/3). In the SVC basic screen it is selected whether a new inquiry "Send New Request for Info service" or the option "View Info service of ..." should be carried out for looking at an earlier Info data record. Using the rotary/push button on the COMAND operating, display and control unit (A40/3) the selection is made and confirmed by pressing.
If "Send New Request for Info Service" is selected, the COMAND operating, display and control unit (A40/3) transmits this inquiry to the service provider via the existing telephone network.

The request is processed on the Internet on the basis of the personal information profile and sent to the vehicle via the telephone network. The user is alerted to receipt by an acoustic signal and the message "New Info Received!". The safety inquiry "Read Later When Stopped?" with the decision"Yes" or "No" is used for road safety.
The selection "Yes" results in skipping back into the preceding menu (e.g. radio, CD, navigation). By selecting "No" the messages are listed in accordance with personal preferences. The messages can be read in sequence. By pressing the rotary/push button on the COMAND operating, display and control unit (A40/3) the system moves quickly on to the next message. It is possible to scroll through the message by turning the rotary knob and pushbutton.

It is possible to go back to the previous menu at any time using the "back" key.

The information that has been received can be paged through page by page. It is not possible to jump straight to a particular page. The formatting can be changed by the user.