GF00.20-P-2010Q Display Service Scope, Function

GF00.20-P-2010Q Display Service Scope, Function
- Model 209.3/ 4







15.03.07 The document has been updated to this date and will no longer be subject to revision.

Display of the service to be performed
The particular type of service to be performed (A or B) appears in addition to the service displays. The service scope (A/B) CAN-Be displayed in km (miles), "Service A in XXXXX km", or in days, "Service A in XXX days". Additionally, the service symbol (wrench) appears.

Service A is basically followed by service B.

Following a service B, the following service must be calculated under consideration of the mileages. If the driven kilometers for the current interval are less than 22,000 km, Service A is performed, if not then Service B is performed. This calculation is done automatically in the instrument cluster (A1). In the service sheet, the displayed service A or B can be processed without calculation of the path.

Service indicator can be called up by driver
A function requirement is that the transmitter key (A8/1) is turned to position "circuit 15R ON", "circuit 15 ON" or that the vehicle is driving. The driver must observe the following procedure to display the service indicator:
- A function requirement is that the transmitter key (A8/1) is turned to position "circuit 15R ON", "circuit 15 ON" or that the vehicle is driving. The driver must observe the following procedure to display the service indicator:
- Press the scroll forward/back button (S110s1) repeatedly until the service symbol and the current remaining distance, remaining time or service exceeded are displayed.

Automatic service indicator
- If the warning threshold has been reached
- 5 s after the transmitter key (A8/1) was moved into position "circuit 15 ON" or the engine was started.
- After the remaining distance has been reached