Interior - Noise When Moving Front Seat Back Rests

DTB

Date: October 7, 2008
Order No.: P-B-91.10/176
Supersedes:
Group: 91

SUBJECT: Model 203.740/747/764
Model 209.356/365/372/375/376/377/456/465/472/475/476/477
Seat Noise from Driver and/or Passenger Seat

If you receive customer reports in the above model vehicles of a noise when moving either front seat backrest forward to access the back seats, this could be caused by the backrest locking mechanism needing grease. Follow the steps below to correct.

1. Access the backrest locking mechanism located on the door side of the seat frame by moving the seat all the way forward.

2. Apply grease A002 989 06 51 to the four locations of the locking mechanism as shown in Figure 1 and 2, circles.










Parts Information







NOTE: The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on October 7, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.

In Case of Warranty

Operation: Seat frame, lubricate (91-0000)