GF98.00-P-4040Q Overview of Filler

GF98.00-P-4040Q Overview Of Filler

Component Identification:

Material:
Hydrofiller, highly resistant to stone chips or hydrofunction layer

Processing procedure:
ESTA

Coating thickness:
25 to 35 microm

Intermediate evaporation:
70 °C object temperature, 5 min

Baking conditions:
145 to 155 °C object temperature, 20 min

Function:
^ The filler meets the prerequisites for good spreading characteristics and visual properties for the top coat.
^ The high resiliency provides good resistance to stone impact in the entire paint structure even at low temperatures.
^ Corrosion protecting pigments increase the corrosion protection properties, particularly on sheet metal edges.
^ Compensating for small blemishes.