A. Preparing For the Installation

1. Read these installation instructions in their entirety before proceeding.

2. Unpack and compare the installation parts against the Parts Information list in Section E.

3. Open the trunk.

4. Remove the trunk lid paneling.

^ See WIS document AR68.30-P-8150Q, Remove/install trunk lid paneling"

5. Remove the trunk lid lock.

^ See WIS document AR88.50-P-5020P, "Remove/install and adjust trunk lid lock and striker eye"

6. Remove the trunk paneling on the left side.

^ See WIS document AR68.30-P-4600PB, "Remove/install paneling in trunk"

7. Remove the rear SAM control unit with fuse and relay module.

^ See WIS document AR54.21-P-1259Q, "Remove/install SAM control unit with fuse and relay box in rear Remove/install"